This Fibaro Z-Wave Double Switch Controller requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.
The Fibaro Z-Wave Double Switch Controller also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers.
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
Z‐Wave device type
Z-Wave Switch, Routing Slave
110-230V ± 10% 50/60 Hz
Up to 15m indoors with no obstacles
Indoor use only, up to 1.5kW resistive load per circuit
0 ~ 55 °C
‐10 ~ 80 °C
EN 55015, EN 60669-2-1
Regulatory Compliance Mark
(LxWxH) 42mm x 37mm x 17mm