FIBARO Z-Wave Flood Sensor

$199.00 incl GST

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.

The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range.

Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.

Available on backorder



• Compatible with any Z-Wave network controller,
• May be connected to any alarm system (potential free output terminal),
• Extremely easy installation – simply put on a surface prone to flooding,
• May be installed anywhere – flood sensor’s contacts extended with a wire,
• Battery or VDC powered. When connected to an external, VDC power source, the
 battery serves as an emergency power source,
• Theft protection – tilt is reported to the Z-Wave network or alarm system’s main controller,
• Two operating modes – flood / temperature sensor or just a temperature sensor.
Product Name 
Flood Sensor
Battery Type
Operation Range
12 – 24 VDC (optional)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
Operation temperature
0 – 40C*
Measured temperature range-20 to 100C
Temperature measuring accuracy
0,5 C
Size (Diameter x Height)
72 x 28 mm

Additional information

Weight650 g
Dimensions72 × 72 × 28 mm