Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Do not connect the module to loads exceeding recommended values. Connect the module only in accordance to the manual and diagrams below. We recommend installation by a qualified electrician only.
Flush 1 relay
24V DC or 240V AC
921.42 MHz (AU/NZ Z-Wave)
-10 -+40 C*
|Measured temperature range||0,5o C (within 0o C – 40o C range) (optional sensor)|
Temperature measuring accuracy
Dimensions (W x H x D)
41,8 x 36,8 x 15,4mm