Showing 1–10 of 16 results

FIBARO Z-Wave Flood Sensor

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.

The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range.

Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.

DHS Active Infrared Sensor

The Active Infrared Sensor is part of sensors family that creates an invisible infrared beam between the two units which can be placed up to 20 metres apart. The trigger activates when someone or something moves through and breaks the beam. This sensor can be connected with any binary Z-Wave sensors to be a part of Z-Wave ecosystem.

It can be great safety option for the garage door automation. Ideal for nursing care of the elderly, monitoring of children’s movements, monitor doorways, windows, deterring and warning of unwanted intruders etc.

Please note: 12V Power supply is required.

PHILIO Z-Wave Smoke Sensor

The PHILIO Smoke Sensor is a battery operated Z-Wave Plus ionisation smoke detector. Smoke detection is signaled through siren and LED diode. Additionally, the smoke sensor signal can be sent via Z-Wave gateway to authorised user’s smartphones or tablets. The PHILIO  Smoke Sensor is designed to be placed on a ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor). Beeping signal warns when the battery needs replacing.

VISION Z-Wave Tilt Sensor

The VISION Z-Wave Garage Door Tilt Sensor is designed for use with any object whose operation results in a change of vertical/horizontal orientation. Possible uses include:

  • Attached to a panel/tilt garage door to detect when it is opened and closed
  • Attached to a letter box door to send an alert when mail is delivered
  • Attached to the back of a home theatre chair to dim the lights when reclined
  • Attached to the boot of a car to trigger an event when it is opened or closed
  • Attached to a tilt style window frame to trigger an alarm if opened by an intruder

FAKRO Rain Sensor

When you’re away from home, the FAKRO ZRD Rain Sensor is the perfect solution for dealing with unpredictable weather changes. When the ZRD Rain Sensor detects rainfall, it will automatically close any motorised windows situated around the home. The ZRD Rain Sensor can work in conjunction with many window installation types, including skylights, awnings and much more. By having every aspect of the home regularly monitored, the system can immediately react to changes in weather.

FIBARO Door / Window Sensor

The FIBARO Z-Wave D/W Sensor is a small, battery powered magnetic door and window sensor.

  • Easy to use and install
  • Completely wireless
  • Automatic software updates
  • Comes in multiple (seven) colours
  • Tamper and low battery alarm notification

FIBARO Z-Wave Multi Sensor

The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.

 

Features:

  • Compatible with any Z-Wave controller.
  • Detects motion using a passive IR sensor.
  • Measures the temperature.
  • Measures the light intensity.
  • Easy installation on a wall or any surface.
  • Protected against tampering and theft – once vibrations are detected, the notification is sent to the main controller.
  • Alarms of movement and temperature are signaled by LED diode blinking.
  • Simple earthquake detector mode.

 

AEOTEC Z-WAVE WATER SENSOR 6

Water Sensor 6. Your home’s 6th sense.

We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs.

Water Sensor 6 doesn’t just monitor for when a pipe has burst or is leaking, it can take protective measures to help limit the amount of damage caused.

Using the power of Z-Wave you can put Water Sensor 6 in control of other Z-Wave devices so that, when the worst occurs, Water Sensor 6 do anything from sending alerts to turning off electricity and water valves in order to protect your home and your loved ones.

Water Sensor 6 is a:

  • Water Sensor
  • Tilt Sensor
  • Vibration Sensor
  • Temperature Sensor
  • Safety Sensor – programmed to take action when needed, by Auto-closing water valves, Turning on sump pumps, and Auto turning off power

 

AEOTEC Z-WAVE RECESSED DOOR SENSOR GEN5

Recessed Door Sensor is a simple idea. It tells you and your Z-Wave network if a door is open or closed. Simple but powerful, Recessed Door Sensor enables you to create a whole new level of control through Z-Wave. Alarms. Safety. Intelligence. Automated decisions. All enabled by one simple, powerful and invisible device.

 

Simple to install.
The beauty of an invisible installation is complemented by the beauty of a simple installation. Installing Recessed Door Sensor is easy. Adding it to your home’s network takes no more than activating its battery and syncing it with your Z-Wave system. Making the whole thing invisible means little more than a slight drill hole hidden away on the top of your door. It’s the sort of installation that takes no more than 10 minutes but provides years’ worth of benefits.

 

 

AEOTEC Z-WAVE MULTI-SENSOR 6 – RECESSOR TRIM

MultiSensor 6 is smartest and most subtle Z-Wave sensor available. Within its impossibly small design it features 6 different Z-Wave sensors, effortlessly monitoring a room and making your connected home all the more intelligent.

With this Recessor Trim, the impossibly small MultiSensor 6 becomes even smaller. In fact, it becomes nearly invisible, sitting only 1mm within a room.

12mm of sensor: We like things small. We prefer them invisible. Recessor offers the best of both. It lets MultiSensor 6 monitor 6 different points of intelligence in a room, and it lets it do it without reducing its accuracy or functionality.

Self-holding: Itself only 44mm deep, Recessor snaps in place courtesy of 2 ingenious retaining spring clips. Those same springs of course allow for Recessor and MultiSensor 6 to be removed at any time without damaging your ceiling or wall.

Ceiling installation: Monitor a full room with MultiSensor 6 using Recessor to install it within your ceiling.

Wall installation: Use MultiSensor 6 as a beam sensor by installing it within a wall cavity using Recessor.

Tiltable: Once recessed, your MultiSensor 6 can be angled up to 30º within Recessor, fine tuning its measurements and readings to be just where you need them.

Cut-out: 75mm